Wilsonart Adhesive Certified Product Data Sheet
This chart lists the volatile organic compound (VOC) and volatile
hazardous air pollutant (VHAP)
content of Wilsonart Adhesive products.
As provided for in 40CFR805.a for coatings which do not release VOC
or HAP byproducts during the cure, the VHAP information given above is based on
formulation data.
The information contained in this document is provided to assist the
user of these products in complying with the appropriate federal, state, and
local laws and regulations. Although Wilsonart International, Inc. believes the
data contained herein to be accurate and to have been derived from reliable
sources, the provision of this information is not intended to constitute a
warranty or a representation of performance by Wilsonart International, Inc.
Certified by Wilsonart International Inc., January 2, 2007.
|
Adhesive Type |
VHAP content*
(lbs.VHAP/lbs.Solids) |
VOC content**
(g/L)(/lbs./gal) |
Density***
(lbs./gal) |
Solids content***
(% by weight) |
| WA 500 |
0.83 |
601 / 5.01 |
6.73 |
19.50 |
| WA 600 |
1.25 |
671 / 5.60 |
7.00 |
20.00 |
| WA 800/801 |
0.82 |
609 / 5.08 |
6.64 |
18.00 |
| WA 810/811 |
0.07 |
538 / 4.49 |
6.88 |
20.50 |
| WA 830/831 |
0.07 |
399 / 3.33 |
7.38 |
28.50 |
| WA 840/841 |
0.38 |
576 / 4.80 |
6.62 |
18.00 |
| WA 850/851 |
0.68 |
602 / 5.02 |
6.63 |
17.00 |
| WA 860/861 |
0.74 |
604 / 5.04 |
6.63 |
17.00 |
| WA 880/881 |
0.47 |
538 / 4.49 |
6.92 |
24.00 |
| WA 950/951 |
0.75 |
606 / 5.06 |
6.62 |
17.00 |
| WA 970/971 |
0 |
598 / 4.99 |
6.99 |
17.00 |
| WA 980/981 |
0.70 |
602 / 5.02 |
6.64 |
17.00 |
*VHAP content indicates VHAP which are present in amounts
greater than or equal to 1.0 percent by weight (or, for OSHA defined
carcinogens, greater than 0.1 percent by weight). VHAP content based on lowest
acceptable solids to solvent ratio, thus actual VHAP content may be slightly
less.
**VOC content calculated per EPA Method 24 which excludes water and
certain exempt compounds from inclusion as VOC’s. VOC content based on lowest
acceptable solids to solvent ratio, thus actual VOC content may be slightly
less.
***Density and Solids content based on formulation data and on lowest
acceptable solids to solvent ratio, thus actual solids content
may be as much as 2% greater than that shown, and is formulated to be 0.5% to 1.0%
greater than the solids content shown.
