Wilsonart Contact Adhesives

Wilsonart® H2O Water-based Contact Adhesive
Wilsonart® H2O Water-based Contact Adhesive
  • Designed as an alternative for locations where the use of flammable solvents is prohibited or regulated by local air quality regulations
  • Non-Flammable
  • Extremely low VOC and VHAP content
  • Use on flatwork, stationary postforming or high-speed postforming applications
  • Spray, roller or brush applied
  • Consumer or professional use
  • Available size(s): 1-gallon, 5-gallon pail, 55-gallon drum and 275-gallon tote

 

This product is GREENGUARD® Certified.
This product is GREENGUARD® Certified.
Click here to download the certificate
Download Technical Data Sheet(s):

These files are in PDF format and require Adobe® Acrobat® Reader to view. If you already have Acrobat Reader installed, simply click on a file to view. If you do not have Adobe Acrobat Reader, click here to go to the Adobe site and download this software.

Color:
White & Green (H2O)

Coverage (Bonded):
357 sq.ft./gal at 3.0 dry grams/sq.ft.

Solids Content:
52%±2.0%

Density:
9.1 lbs/gallon

Dry Time:
20-30 minutes

Open Time:
~60 minutes

VOC/(less water & exempt solvent):
<0.1 g/L (Calculated)

VHAP Content:
<0.035 lbs/lbs solids

Certifications:
GREENGUARD® Certified

Compliance(s):
Ozone Transport Commission SCAQMD, Rule 1168

Qualifies for LEED® Credit(s):
LEED®-NC & CI EQ Credit 3.2 LEED®-NC & CI EQ Credit 4.1 LEED®-NC & CI EQ Credit 4.4 LEED®-NC & CI EQ Credit 4.5


QUESTION:
Why use Wilsonart H2O instead
of solvent-based contact adhesives?

ANSWER:
Wilsonart H2O performs like a solvent-based contact adhesive
but can be used in areas of the country where flammable solvent-based contact adhesives are prohibited. This product is also GREENGUARD Certified, which can help you acquire LEED
points. Another benefit of
Wilsonart H2O is that it bonds 2x-3x the area than solvent-based contact adhesive. This product
can take longer to dry, but can be sped up with heat and fans.